Welcome to Abdul Malik Ikhsan's Blog

Functional Test Symfony 4 with Kahlan 4

Posted in Symfony 4, testing by samsonasik on January 3, 2018

Yes, there is a bundle for it, but currently not fully work well with kahlan 4 yet. However, we can still use kahlan 4 for it. The simplest way is define Symfony 4 skeleton bootstrap in kahlan config, and use its property at specs, for example, we configure config at kahlan-config.php as follows:

<?php // kahlan-config.php 

use App\Kernel;
use Kahlan\Filter\Filters;
use Symfony\Component\HttpFoundation\Request;

Filters::apply($this, 'bootstrap', function($next) {

    require __DIR__ . '/vendor/autoload.php';

    $root = $this->suite()->root();
    $root->beforeAll(function () {
        $this->request = Request::createFromGlobals();
        $this->kernel  = new Kernel('test', false);
    });

    return $next();

});

Above settings are minimal, if you need more setup, you can define there. If you didn’t require kahlan/kahlan:^4.0, you can require via composer:

$ composer require --dev kahlan/kahlan:^4.0

Give a try

Let’s try testing a famous /lucky/number from LuckyController. We have the following controller:

<?php // src/Controller/LuckyController.php

namespace App\Controller;

use Symfony\Bundle\FrameworkBundle\Controller\Controller;
use Symfony\Component\Routing\Annotation\Route;

class LuckyController extends Controller
{
    /**
     * @Route("/lucky/number", name="lucky_number")
     */
    public function number()
    {
        $number = mt_rand(0, 100);

        return $this->render('lucky/number.html.twig', [
            'number' => $number,
        ]);
    }
}

And our twig file is:

{# templates/lucky/number.html.twig #}

<h1>Your lucky number is {{ number }}</h1>

We can place test under spec directory at root directory, for its test, we can create a spec/Controller directory:

kahlan.config.php
├── spec
│   └── Controller

Now, we can create the test as follows with make request to the ‘/lucky/number’ page and get its response. We can use toMatchEcho matcher provided with regex to get match random number of mt_rand(0, 100) that printed inside a response html content:

<?php // spec/Controller/LuckyControllerSpec.php

namespace App\Spec\Controller;

describe('LuckyController', function () {

    describe('/lucky/number', function () {

        it('shows lucky number', function () {

            $request = $this->request->create('/lucky/number', 'GET');
            $response = $this->kernel->handle($request);

            expect(function () use ($response) {
                $response->send();
            })->toMatchEcho(
                "#Your lucky number is ([0-9]|[1-8][0-9]|9[0-9]|100)#"
            );

        });

    });

});

Time to run it with command:

$ vendor/bin/kahlan 

We will get the success output:

That’s it 😉

ErrorHeroModule : a Hero for Your Zend Mvc and Expressive Application

Posted in expressive, Teknologi, Zend Framework, Zend Framework 2, Zend Framework 3 by samsonasik on December 20, 2017

After > 1 year work with 52 releases, I think it is time to show off. Even you have 100% test coverage, error may can still happen, that’s why ErrorHeroModule was born. ErrorHeroModule is a Hero for your Zend Mvc, and zend-expressive application to trap php errors and exception with configureable options.

The logging storage is mainly a database, then can continue “log” to your email when you want it.

Features

1. Save to DB with Db Writer Adapter

We can choose using Zend\Db or Doctrine via DoctrineORMModule. The error log is recorded like below:

2. Log Exception (dispatch.error and render.error) and PHP Errors in all events process

This handle all Exceptions and Errors with support PHP 7 Error during MVC process or middleware flow.

3. Support excludes PHP E_* Error (eg: exclude E_USER_DEPRECATED) in config settings

This can be used when you have a functionality which has collection of E_* errors, and you need to keep the functionality to run.

4. Support excludes PHP Exception (eg: Exception class or classes that extends it) in config settings

This can be used when you have exceptions that you want to have special treatment.

5. Handle only once log error for same error per configured time range

This can be used when on some environment, eg: in production, we don’t want to get same error repeatly reported in some periodic time while we are fixing it.

6. Set default page (web access) or default message (console access) for error if configured ‘display_errors’ = 0

This can be used to set a “nice” page on web environment:

or content on console access:

7. Set default content when request is XMLHttpRequest via ‘ajax’ configuration

This can be used to set a default content when request is an XMLHttpRequest.

8. Provide request information ( http method, raw data, query data, files data, and cookie data )

This can be used to help reproduce the error.

9. Send Mail

This has options:
– many receivers to listed configured email
– with include $_FILES into attachments on upload error.

This can be used to help reproduce the error, with include uploaded data when error happen when we just submitted a form with upload process.

Support

This module support zend-mvc:^2.5 and zend-expressive:^1.1|^2.0 with php version ^5.6|^7.0. My plan is to drop php ^5.6 in version 2.

Limitations

There are some limitations right now and I want it to be implemented in next releases:

General functionality:

  • Allow custom formatter when log to email, currently, it send Json format to email.

Current Json Formatter is really stable with the following format sample data:

{
    "timestamp": "2017-12-20T15:23:00+07:00",
    "priority": 3,
    "priorityName": "ERR",
    "message": "a sample error preview",
    "extra": {
        "url": "http://app.dev/error-preview",
        "file": "/var/www/app/vendor/samsonasik/error-hero-module/src/Controller/ErrorPreviewController.php",
        "line": 11,
        "error_type": "Exception",
        "trace": "#0 /var/www/app/vendor/zendframework/zend-mvc/src/Controller/AbstractActionController.php(78): ErrorHeroModule\\Controller\\ErrorPreviewController->exceptionAction()
#1 /var/www/app/vendor/zendframework/zend-eventmanager/src/EventManager.php(322): Zend\\Mvc\\Controller\\AbstractActionController->onDispatch(Object(Zend\\Mvc\\MvcEvent))
#2 /var/www/app/vendor/zendframework/zend-eventmanager/src/EventManager.php(179): Zend\\EventManager\\EventManager->triggerListeners(Object(Zend\\Mvc\\MvcEvent), Object(Closure))
#3 /var/www/app/vendor/zendframework/zend-mvc/src/Controller/AbstractController.php(106): Zend\\EventManager\\EventManager->triggerEventUntil(Object(Closure), Object(Zend\\Mvc\\MvcEvent))
#4 /var/www/app/vendor/zendframework/zend-mvc/src/DispatchListener.php(138): Zend\\Mvc\\Controller\\AbstractController->dispatch(Object(Zend\\Http\\PhpEnvironment\\Request), Object(Zend\\Http\\PhpEnvironment\\Response))
#5 /var/www/app/vendor/zendframework/zend-eventmanager/src/EventManager.php(322): Zend\\Mvc\\DispatchListener->onDispatch(Object(Zend\\Mvc\\MvcEvent))
#6 /var/www/app/vendor/zendframework/zend-eventmanager/src/EventManager.php(179): Zend\\EventManager\\EventManager->triggerListeners(Object(Zend\\Mvc\\MvcEvent), Object(Closure))
#7 /var/www/app/vendor/zendframework/zend-mvc/src/Application.php(332): Zend\\EventManager\\EventManager->triggerEventUntil(Object(Closure), Object(Zend\\Mvc\\MvcEvent))
#8 /var/www/app/public/index.php(53): Zend\\Mvc\\Application->run()
#9 {main}",
        "request_data": {
            "query": [],
            "request_method": "GET",
            "body_data": [],
            "raw_data": "",
            "files_data": [],
            "cookie_data": {
                "ZS6SESSID": "pbihc9ts004oq4b5alg4tg91b6",
                "PHPSESSID": "bkd7jaj22z936vstc9l0xuc9sr2dqp4g",
            }
        }
    }
}

The drawback with allow custom formatter is you maintain/keep an eye yourself for the formatter you provide!

Zend Mvc application:

  • Trap exception and error when they happen at Module::init().

Zend Expressive application:

  • Make support for non zend-servicemanager for container. (support zend-servicemanager, symfony, aura, auryn, and pimple for zend-expressive application at version 2.9.0)
  • Make support for non zend-view for custom page template engine when error happen. (supported at version 2.1.0)

That’s it for now. If you see something can be improved, please contribute! Thank you for all users that using it.

Apigility: Using zf-oauth2’s refresh_token_lifetime to create client’s remember me functionality

Posted in Tutorial PHP, Zend Framework 2, Zend Framework 3 by samsonasik on August 13, 2017

If you’re building client based application which require oauth authentication to apigility application which uses time based expire access token, you may want to create a remember me functionality in client.

PHP Configuration

The very first required is set the client and the server side has same timezone, eg:

# your php.ini
date.timezone = "Asia/Jakarta"

This is ensure that you have actually same time for both client and api server.

DB data requirements

If you already setup the Oauth2 DB, you need to insert/update the client to support “password” and “refresh_token”, that use both means use space-separated value eg:

INSERT INTO `oauth_clients` (`client_id`, `client_secret`, `redirect_uri`, `grant_types`, `scope`, `user_id`) VALUES
(
    'test',
    '$2y$10$vbuy12RNSTJ.LHDdivegwu9dqkxh8h6OS4VoIX64HQGngAqUfcSJe',
    '/oauth/receivecode',
    'password refresh_token',
    NULL,
    NULL
);

Above sql insert data to oauth_clients table with client_id valued “test” with bcrypted client_secret “test”.

You can also insert a users data, for example:

INSERT INTO `oauth_users` (`username`, `password`) VALUES
(
    'test',
    '$2y$10$vbuy12RNSTJ.LHDdivegwu9dqkxh8h6OS4VoIX64HQGngAqUfcSJe'
),

Above sql insert data to oauth_users table with username valued “test” with bcrypted password “test”.

ZF-Oauth2 configuration

In apigility side, we can configure the “zf-oauth2” config, for example, as follows:

// config/autoload/global.php
return [
    // ...
    'zf-oauth2' => [
        'access_lifetime' => 1800,
        'options' => [
            'refresh_token_lifetime' => 604800,
            'always_issue_new_refresh_token' => true,
        ],
    ],
];

The configuration above means we can have an access token lifetime in 1800 seconds, and we can re-issue the new token lifetime with existing “refresh_token” as far as the time range is not > 604800 seconds ( 1 week ). For example, we authenticate with data:

{
    "grant_type": "password",
    "username": "test",
    "password": "test",
    "client_id": "test",
    "client_secret" : "test"
}

have authenticated tokens data like the following:

{
  "access_token": "8e4b0e5ddc874a6f1500514ef530dbea3976ae77",
  "expires_in": 1800,
  "token_type": "Bearer",
  "scope": null,
  "refresh_token": "d19b79cd376924409c14ee46e5230617482fb169"
}

The “refresh_token” is the key here.

The client application

I assume you’re using Zend Framework 2/3 application for client side, which we can use Zend\Authentication\AuthenticationService service. We can build custom Auth storage for it, eg:

namespace Application\Storage;

use Zend\Authentication\Storage;

class AuthStorage extends Storage\Session
{
    public function __construct()
    {
        parent::__construct('app_client');

        $sessionConfigOptions = [
            'use_cookies'     => true,
            'cookie_httponly' => true,
            'gc_maxlifetime'  => 1800,
            'cookie_lifetime' => 1800,
        ];
        $this->getSessionManager()->getConfig()
                                  ->setOptions($sessionConfigOptions);
    }

    public function rememberMe($time)
    {
        $this->getSessionManager()->rememberMe($time);
    }

    public function clear()
    {
        $this->getSessionManager()->forgetMe();
        parent::clear();
    }

    public function getSessionManager()
    {
        return $this->session->getManager();
    }
}

You can now create factory to build the AuthenticationService service with the authstorage like I blog posted at Create ZF Client Authentication for Apigility Oauth with ApigilityConsumer post.

On authentication part, eg: AuthenticationController, you can do:

$result = $this->authenticationService->authenticate();

if ($result->isValid()) {
    $storage = $this->authenticationService->getStorage();

    // save next "expires" time to session
    $storage->write(
        $storage->read() +
        [
            // it is better to use
            // api service to get the `oauth_access_tokens` real expires
            'expires' => date('Y-m-d H:i:s', time() + $read['expires_in'])
        ]
    );

    // for example, you have "rememberme" checkbox
    if (($rememberme = $request->getPost('rememberme')) == 1 ) {

        $storage->rememberMe(604800);

        $read = $storage->read();
        $storage->write(
            compact('rememberme') +
            $read +
            [
                // it is better to use
                // api service to get the `oauth_refresh_tokens` real expires
                'refreshExpires' => date('Y-m-d H:i:s', time() + 604800)
            ]
        );
    }
    // ...
}

We are going to use “expires” as immediate check session lifetime hit the expires, and “refreshExpires” to check when it stil be able to re-issue new token.

In bootstrap, for example, in Application\Module::onBootstrap() you can verify it to re-issue the token when access lifetime has hit.

namespace Application;

use Zend\Authentication\AuthenticationService;
use Zend\Mvc\MvcEvent;

class Module
{
    // ...
    public function onBootstrap(MvcEvent $e)
    {
        $services = $e->getApplication()->getServiceManager();
        $storage  = $services->get(AuthenticationService::class)->getStorage();
        $read     = $storage->read();

        if (isset($read['access_token'])) {

            $timeFirst   = strtotime($read['expires']);
            $currentTime = date('Y-m-d H:i:s');
            $timeSecond  = strtotime($currentTime);
            $counter     = $timeFirst - $timeSecond;

            if (! empty($rememberme = $read['rememberme'])) {

                $storage->getSessionManager()
                        ->getConfig()
                        ->setStorageOption('gc_maxlifetime', 604800)
                        ->setStorageOption('cookie_lifetime', 604800);
                
                if ($counter < 0 && $currentTime < $read['refreshExpires']) {

                    // API CALL to apigility oauth uri
                    // with grant_types = "refresh_token" and uses
                    // refresh_token as the key to re-issue new token
                    //
                    //    {
                    //        "grant_type"    : "refresh_token",
                    //        "refresh_token" : $read['refresh_token']
                    //        "client_id"     : "test",
                    //        "client_secret" : "test"
                    //    }
                    //
                    $storage->write(
                        [
                            // it is better to use
                            // api service to get the `oauth_access_tokens` real expires
                            'expires' => date('Y-m-d H:i:s', time() + $read['expires_in']),

                            // api service to get the `oauth_refresh_tokens` real expires
                            'refreshExpires' => date('Y-m-d H:i:s', time() + 604800),
                        ] +
                        compact('rememberme') +
                        [
                            "access_token": "<new access token based on oauth call>",
                            "expires_in": <new expire_in based on oauth call>,
                            "token_type": "<new token_type based on oauth call>",
                            "refresh_token": "<new refresh_token token based on oauth call>"
                        ] +
                        $read
                    );

                    $read = $storage->read();
                }
            }

            if ($currentTime > $read['expires'])) {
                // force clean up session
                $storage->clear();
            }

        }

    }
    // ...
}

Note

As commented in the codes sample above, in your real life application, it is beter to use real token expires instead of adding current time with expire_in time or manual fill refresh token lifetime. Do more automation yourself!

If you use Zend Framework 2/3 or Zend Expressive, you can try ApigilityConsumer for client module to consume api services. Enjoy 😉

Auto add _links property of HAL Resources into all api service in Apigility

Posted in Tutorial PHP, Zend Framework, Zend Framework 2, Zend Framework 3 by samsonasik on July 10, 2017

If you want to have the _links property value to HAL Resource in apigility api service, for example:

{
    "id": 1,
    "name": "Abdul Malik Ikhsan",
    
    "_links": {
        "self": {
            "href": "http://api.dev/user/1"
        }
    }
}

you can do manually in every api service:

use ZF\ContentNegotiation\ViewModel;
use ZF\Hal\Entity as HalEntity;
use ZF\Hal\Link\Link;

// ...

    public function userAction()
    {
        $halEntity = new HalEntity([
             'id' => 1,
             'name' => 'Abdul Malik Ikhsan',   
        ]);

        $link = $halEntity->getLinks();
        $link->add(Link::factory(
              [
                  'rel' => 'self',
                  'url' => $this->getRequest()->getUriString(),
              ]
        ));

        return new ViewModel([
            'payload' => $halEntity,
        ]);
    }

// ...

You can eliminate that by apply via EventManager’s Shared Manager which attach to Zend\Mvc\Controller\AbstractActionController on dispatch event, like below:

namespace Application;

use Zend\Mvc\Controller\AbstractActionController;
use Zend\Mvc\MvcEvent;
use ZF\Hal\Link\Link;
use ZF\Hal\Plugin\Hal;

class Module
{
    public function onBootstrap(MvcEvent $e)
    {
        $app       = $e->getApplication();
        $sharedEvm = $app->getEventManager()->getSharedManager();

        $sharedEvm->attach(AbstractActionController::class, 'dispatch',
            function($event) use ($sharedEvm) {

                $uri = $event->getRequest()->getUriString();

                $sharedEvm->attach(Hal::class, 'renderEntity', function($event) use ($uri) {
                    $event->getParam('entity')
                          ->getLinks()
                          ->add(Link::factory(
                                [
                                    'rel' => 'self',
                                    'url' => $uri,
                                ]
                            ));
                });

            },
            100
        );

    }

    public function getConfig() { /* */ }
}

On above code, we attach ZF\Hal\Plugin\Hal on renderEntity event which get the ZF\Hal\Entity object from ZF\ContentNegotiation\ViewModel payload property, and apply Link into it via ZF\Hal\Link\Link::factory().

Now, you can eliminate unneeded repetitive codes in all every api services.

Done 😉

Tagged with: , ,

Using Direct ArrayObject instance as ObjectPrototype in Zend\Db

Posted in Zend Framework 2, Zend Framework 3 by samsonasik on May 25, 2017

When creating a table model for ZF2 or ZF3 application with Zend\DB, direct ArrayObject instance can be usefull as ResultSet object prototype. We can no longer need to create an individual class that has getArrayCopy() or exchangeArray() for data transformation.

For example, we have the following table model:

<?php
namespace Application\Model;

use Zend\Db\TableGateway\AbstractTableGateway;

class CountryTable
{
    public static $table = 'country';
    private $tableGateway;

    public function __construct(AbstractTableGateway $tableGateway)
    {
        $this->tableGateway = $tableGateway;
    }

    public function getCountriesInAsia()
    {
        $select  = $this->tableGateway->getSql()->select();
        $select->where([
            'continent' => 'ASIA'
        ]);

        return $this->tableGateway->selectWith($select);
    }
}

The ArrayObject usage we can use is:

new ArrayObject([], ArrayObject::ARRAY_AS_PROPS);

So, we can build the factory for above table model as follows:

<?php
namespace Application\Model;

use ArrayObject;
use Interop\Container\ContainerInterface;
use Zend\ServiceManager\Factory\FactoryInterface;
use Zend\Db\ResultSet\HydratingResultSet;
use Zend\Db\TableGateway\TableGateway;

class CountryTableFactory implements FactoryInterface
{
    public function __invoke(ContainerInterface $container, $requestedName, array $options = null)
    {
        $resultSetPrototype = new HydratingResultSet();
        $resultSetPrototype->setObjectPrototype(
             new ArrayObject([], ArrayObject::ARRAY_AS_PROPS)
        );
        
        $tableGateway =  new TableGateway(
            CountryTable::$table,
            $container->get('Zend\Db\Adapter\Adapter'),
            null,
            $resultSetPrototype
        );

        return new CountryTable($tableGateway);
    }
}

and register it into service_manager under factories:

<?php
namespace Application;

return [
    // ...
    'service_manager' => [
        'factories' => [
            Model\CountryTable::class => Model\CountryTableFactory:class,
        ],
    ],
];

When retrieving the data, you can do the followings:

use Application\Model\CountryTable;

$countryTable    = $container->get(CountryTable::class);
$countriesInAsia = $countryTable->getCountriesInAsia();

foreach ($countriesInAsia as $key => $row) {

    // dump a copy of the ArrayObject
    var_dump($arrayCopy = $row->getArrayCopy());

    // echoed column as property
    echo $row->name; // with value "INA"
    echo $row->iso;  // with value "ID"
    echo $row->continent; // with value "ASIA"

    // echoed as array with provided key
    echo $row['name']; // with value "INA"
    echo $row['iso'];  // with value "ID"
    echo $row['continent']; // with value "ASIA"

    // modify data via exhangeArray
    $row->exchangeArray(array_merge(
		$arrayCopy,
		[
			'name' => 'INDONESIA',
		]
	));

    // or modify its data by its property
    $row->name = 'INDONESIA';
    // or modify its data by its index array
    $row['name'] = 'INDONESIA';

    echo $row->name; // now has value "INDONESIA"
    echo $row['name']; // now has value "INDONESIA"
}

Bonus:

To avoid repetitive creating factory class for each table model, we can create an abstract factory for it:

<?php

namespace Application\Model;

use ArrayObject;
use Interop\Container\ContainerInterface;
use Zend\Db\ResultSet\HydratingResultSet;
use Zend\Db\TableGateway\TableGateway;
use Zend\ServiceManager\Factory\AbstractFactoryInterface;

class CommonModelTableFactory implements AbstractFactoryInterface
{
    public function canCreate(ContainerInterface $container, $requestedName)
    {
        return ((substr($requestedName, -5) === 'Table') && class_exists($requestedName));
    }

    public function __invoke(ContainerInterface $container, $requestedName, array $options = null)
    {
        $tableModel = '\\' . $requestedName;

        $resultSetPrototype = new HydratingResultSet();
        $resultSetPrototype->setObjectPrototype(
            new ArrayObject([], ArrayObject::ARRAY_AS_PROPS)
        );

        $tableGateway =  new TableGateway(
            $tableModel::$table,
            $container->get('Zend\Db\Adapter\Adapter'),
            null,
            $resultSetPrototype
        );

        return new $tableModel($tableGateway);
    }
}

So, now, we can have 1 abstract factory for all table model services:

<?php
namespace Application;

return [
    // ...
    'service_manager' => [
        'abstract_factories' => [
            Model\CommonModelTableFactory:class,
        ],
    ],
];

That’s it 😉

Using Github Access Token with Composer for Private Repository

Posted in GIT, Tutorial PHP by samsonasik on April 16, 2017

If you successfully run composer install which clone Github private repository by hand, you may found a blocker when run the command via script even already added ssh public key and added ssh private key to ssh-agent.

Use case

For example, you have a git hook on post-receive which run composer install.

#!/bin/sh
GIT_WORK_TREE=/var/www/app git checkout -f
cd /var/www/html/app && composer install --no-dev

And your composer.json of your app has a github private repository, for example, as follow:

{
    "require": {
        "yourcompany/lib": "^1.0"
    },

    "repositories" : [
        {
            "type": "vcs",
            "url" : "git@github.com:yourcompany/Lib.git"
        }
    ]

}

Solution

To make it work, first, you need to create a token for it in https://github.com/settings/tokens .

When you get generated token, you can register it in composer.json so the configuration like below:

{
    // ...
    "config": {
      "github-oauth": {
        "github.com": "th3t0k3nth4tG3n3r4t3d"
      }
    }
}

Now, your complete composer.json will be as follow:

{

    "require": {
        "yourcompany/lib": "^1.0"
    },

    "repositories" : [
        {
            "type": "vcs",
            "url" : "git@github.com:yourcompany/Lib.git"
        }
    ],

    "config": {
      "github-oauth": {
        "github.com": "th3t0k3nth4tG3n3r4t3d"
      }
    }

}

That’s it.

Create ZF Client Authentication for Apigility Oauth with ApigilityConsumer

Posted in Tutorial PHP, Zend Framework, Zend Framework 2, Zend Framework 3 by samsonasik on March 28, 2017

If you have Apigility as API builder in API side, and client app that consume it using Zend Framework 2/3 or ZF Expressive, you can create an authentication from the client application that call oauth in apigility side.

Zend\Authentication has AbstractAdapter that you can extends to create custom adapter for its need. Let’s assume the applications are like the following diagram:

[CLIENT - A ZF Application]              [API - An Apigility Application]
         |                                          |
   AuthController                     ZF\MvcAuth\Authentication\OAuth2Adapter          
         |                                          |
         |       authenticateAction()               |
         |   ------------------------------------>  |
         |         identity json                    |
         |   <------------------------------------  |

On oauth result call, you may get the following result:

{
  "access_token": "8e4b0e5ddc874a6f1500514ef530dbea3976ae77",
  "expires_in": 3600,
  "token_type": "Bearer",
  "scope": null,
  "refresh_token": "d19b79cd376924409c14ee46e5230617482fb169"
}

The ApigilityConsumer

ApigilityConsumer is a ZF2/ZF3 Apigility Client module (can also be used in ZF Expressive) to consume Apigility API Services.

You can install by run composer command:

composer require samsonasik/apigility-consumer

For full configurations and features, you can read at its README, for this post’s need, you can do something like this:

<?php
// config/autoload/apigility-consumer.local.php
return [
    'apigility-consumer' => [
        // your apigility host url
        'api-host-url' => 'https://your.apigilty.api.host',

        // your apigility oauth setting
        'oauth' => [

            'grant_type'    => 'password',
            'client_id'     => 'your client id',
            'client_secret' => 'your client secret',

        ],

    ],
];

and register the module into config/application.config.php or config/modules.config.php:

<?php
// config/application.config.php or config/modules.config.php
return [
    'ApigilityConsumer', // <-- register here
    'Application',
],

Create Adapter

You need to extends Zend\Authentication\Adapter\AbstractAdapter and implements Zend\Authentication\Adapter\AdapterInterface. So, You can have the class:

<?php

namespace Application\Adapter;

use ApigilityConsumer\Service\ClientAuthService;
use Zend\Authentication\Adapter\AbstractAdapter;
use Zend\Authentication\Adapter\AdapterInterface;
use Zend\Authentication\Result;

class ApigilityAuthenticationAdapter
    extends AbstractAdapter
    implements AdapterInterface
{
    /**
     * @var ClientAuthService
     */
    private $clientAuthService;

    /**
     * @param  ClientAuthService $clientAuthService
     */
    public function __construct(ClientAuthService $clientAuthService)
    {
        $this->clientAuthService = $clientAuthService;
    }

    /**
     * @return Result
     */
    public function authenticate()
    {
        $clientResult = $this->clientAuthService->callAPI(
            [
                // your oauth registered route segment in apigility. 
                'api-route-segment' => '/oauth', 

                'form-data' => [
                    'username' => $this->getIdentity(),
                    'password' => $this->getCredential(),
                ],

                'form-request-method' => 'POST',
            ]
        );

        if (! $clientResult->success) {
            return new Result(Result::FAILURE, null, $clientResult::$messages);
        }

        return new Result(RESULT::SUCCESS, $clientResult->data);
    }
}

Your can now build a factory from it:

<?php
namespace Application\Adapter;

use ApigilityConsumer\Service\ClientAuthService;

class ApigilityAuthenticationAdapterFactory
{
    public function __invoke($container)
    {
        return new ApigilityAuthenticationAdapter(
            $container->get(ClientAuthService::class)
        );
    }
}

You can then register at service_manager:

<?php
// module/Application/config/module.config.php
namespace Application;

'service_manager' => [
    'factories' => [
        // ...
        Adapter\ApigilityAuthenticationAdapter::class => Adapter\ApigilityAuthenticationAdapterFactory::class,
    ],
],

For ZF Expressive, you can register under ‘dependencies’ key.

Set Adapter into AuthenticationService

You need to set authentication service’s adapter with defined adapter above with factory:

<?php
namespace Application\Factory;

use Application\Adapter\ApigilityAuthenticationAdapter;
use Zend\Authentication\AuthenticationService;
use Zend\Authentication\Storage\Session;

class AuthenticationServiceFactory
{
    public function __invoke($container)
    {
        $adapter = $container->get(ApigilityAuthenticationAdapter::class);

        return new AuthenticationService(
            new Session(), // or your own storage implementing  Zend\Authentication\Storage\StorageInterface
            $adapter
        );
    }
}

You can then register also at service_manager:

<?php
// module/Application/config/module.config.php
namespace Application;

use Zend\Authentication\AuthenticationService;

'service_manager' => [
    'factories' => [
        // ...
        AuthenticationService::class => Factory\AuthenticationServiceFactory::class,
    ],
],

For ZF Expressive, you can register under ‘dependencies’ key.

The AuthController::authenticate()

I assume that you already inject controler with login form, use “username” and “password” as field names, and fill the data, so, your AuthController::authenticate() can be like the following:

<?php
namespace Application\Controller;

use Application\Form\LoginForm;
use Zend\Authentication\AuthenticationService;

class AuthController
{
    public function __construct(
        AuthenticationService $authenticationService,
        LoginForm $loginForm,
    ) { /* ...*/ }

    public function authenticateAction()
    {
        /*
         *    check request and form validity here
         */
        $formData = $this->loginForm->getData();
        $this->authenticationService->getAdapter()
                                    ->setIdentity($formData['username'])
                                    ->setCredential($formData['password']);

        $result = $this->authenticationService->authenticate();
        if (!$result->isValid()) {
            /**
             * For security reason, you should not show user the reason of failure,
             * However, if it actually needed for specific purpose, you can pull by call:
             *
             *     $result->getMessages();
             *
             */
            return $this->redirect()->toRoute('/auth');
        }

        return $this->redirect()->toRoute('/account');
    }
}

For ZF Expressive, you can create routed Authentication middleware.

That’s it, you’re now have successfully created a client authentication for your ZF2/ZF3 or ZF Expressive application that consume Apigility oauth.

Tagged with: , ,

Testing Zend Expressive 2 with kahlan 3

Posted in testing, Tutorial PHP, Zend Framework by samsonasik on March 15, 2017

Zend\Expressive ^2.0 has different default approach for piping and routing middleware which is programmatically way. In this post, I am going to show you how you can test Zend\Expressive ^2.0 application, with assumption, you use its skeleton with kahlan 3.

First, of course, install the Expressive ^2.0 skeleton, for example, install into directory named “expressive2”:

$ composer create-project zendframework/zend-expressive-skeleton:^2.0 expressive2
Installing zendframework/zend-expressive-skeleton (2.0.0)
  - Installing zendframework/zend-expressive-skeleton (2.0.0) Downloading: 100%
Created project in expressive2
> ExpressiveInstaller\OptionalPackages::install
Setting up optional packages
Setup data and cache dir
Removing installer development dependencies

  What type of installation would you like?
  [1] Minimal (no default middleware, templates, or assets; configuration only)
  [2] Flat (flat source code structure; default selection)
  [3] Modular (modular source code structure; recommended)
  Make your selection (2): 3

Now, install kahlan:

$ cd expressive2
$ composer require kahlan/kahlan:^3.1

We are going to need the $app variable inside tests, for example, when testing functionality for each routed middlewares. To simplify and avoid repetitive code, we can register it into kahlan-config.php in root application:

// ./kahlan-config.php
use Kahlan\Filter\Filter;
use Zend\Expressive\Application;

Filter::register('initialize app', function($chain) {

    $root = $this->suite();

    ob_start();

    $root->beforeAll(function ($var) {

        ob_start();

        $var->app = $app
                  = (require 'config/container.php')->get(Application::class);

        require 'config/pipeline.php';
        require 'config/routes.php';

    });

    return $chain->next();

});
Filter::apply($this, 'run', 'initialize app');

By assign $app into “$var->app” like above, the “$app” is accessible from entire tests via “$this->app”, so, we can write test like the following:

// ./src/App/spec/Action/HomePageActionSpec.php
namespace AppSpec\Action;

use Zend\Diactoros\ServerRequest;

describe('HomePageAction', function () {

    describe('/', function () {

        it('contains welcome message', function () {

            $serverRequest = new ServerRequest([], [], '/', 'GET');
            $this->app->run($serverRequest);
            $actual = ob_get_clean();

            expect($actual)->toContain('Welcome to <span class="zf-green">zend-expressive</span>');

        });

    });

});

Now, let’s run the tests:

$ vendor/bin/kahlan --spec=src/App/spec/
            _     _
  /\ /\__ _| |__ | | __ _ _ __
 / //_/ _` | '_ \| |/ _` | '_ \
/ __ \ (_| | | | | | (_| | | | |
\/  \/\__,_|_| |_|_|\__,_|_| | |

The PHP Test Framework for Freedom, Truth and Justice.

Working Directory: /Users/samsonasik/www/expressive2

.                                                                   1 / 1 (100%)



Expectations   : 1 Executed
Specifications : 0 Pending, 0 Excluded, 0 Skipped

Passed 1 of 1 PASS in 0.375 seconds (using 8Mo)

That’s it 😉

Querying PostgreSQL’s JSONB with Zend\Db

Posted in Tutorial PHP by samsonasik on March 13, 2017

PostgreSQL is one of Databases that has json support. If you have table(s) that has json column(s), we can query it with Zend\Db in your php application layer.

For example, we have the following data:

CREATE TABLE album (id serial primary key, data jsonb);

INSERT INTO album VALUES
   (1, '{ "title": "Hello", "singer": "Adelle" }'),
   (2, '{ "title": "September", "singer": "Justin Timberlake" }')
;

We then want to produce SQL like :

select * from album where data ->> 'title' = 'Hello'

There is Zend\Db\Sql\Predicate\Expression for that. So, you can build select with:

use Zend\Db\Sql\Select;
use Zend\Db\Sql\Predicate\Expression;

$select = new Select();
$select->from('album')
       ->where([new Expression("data ->> 'title' = ?", 'Hello')]);

That’s easy! Let’s make it more complicated. We then want to produce SQL with subset of jsonb like:

select * from album where data @> '{"singer": "Adelle"}'

In this case, as it is not a common sql operation across DBs, you need to pass the filter as $expression, the first parameter of Zend\Db\Sql\Predicate\Expression::__construct:

use Zend\Db\Sql\Select;
use Zend\Db\Sql\Predicate\Expression;

$expression = <<<expr
data @> '{"singer": "Adelle"}'
expr;

$select = new Select();
$select->from('album')
       ->where([new Expression($expression)]);

That’s it 😉

Testing CodeIgniter 4 application with kahlan ^3.0

Posted in CodeIgniter 4, Tutorial PHP by samsonasik on January 14, 2017

This is another post series about CodeIgniter and Kahlan, but now, it will uses CodeIgniter 4. CodeIgniter 4 requires some constants and required classes and functions to be included during application bootstrap to make front controller works.
For example, we need to do functional test App\Controllers\Home controller, this is the kahlan-config.php we need to have:

<?php

use CodeIgniter\CodeIgniter;
use CodeIgniter\Services;
use Config\App;
use Config\Autoload;
use Kahlan\Filter\Filter;

Filter::register('ci.start', function($chain) {
    $root = $this->suite();
    $root->beforeAll(function ($var) {

        define('ENVIRONMENT', 'testing');
        define('BASEPATH',    'system'      . DIRECTORY_SEPARATOR);
        define('APPPATH',     'application' . DIRECTORY_SEPARATOR);
        define('ROOTPATH',    'public'      . DIRECTORY_SEPARATOR);
        define('WRITEPATH',   'writable'    . DIRECTORY_SEPARATOR);
        define('CI_DEBUG',    1);

        require BASEPATH . 'Autoloader/Autoloader.php';
        require APPPATH  . 'Config/Constants.php';
        require APPPATH  . 'Config/Autoload.php';
        require APPPATH  . 'Config/Services.php';

        class_alias('Config\Services', 'CodeIgniter\Services');

        $loader = Services::autoloader();
        $loader->initialize(new Autoload());
        $loader->register();

        require BASEPATH . 'Common.php';
        $app = new App();
        Services::exceptions($app, true)->initialize();

        $var->codeIgniter = new CodeIgniter(
            $app
        );

    });
    return $chain->next();
});
Filter::apply($this, 'run', 'ci.start');

We now can call $this->codeIgniter property in all entire tests.

We can then place the spec under spec/ directory:

.
├── DCO.txt
├── README.md
├── application
│   ├── Controllers
│   │   └── Home.php
├── spec
│   └── Controllers
│       └── HomeDispatchSpec.php

We can apply $_SESSION['argv'] and $_SESSION['argc'] to assign URI routing data:

$_SERVER['argv'] = [
    __FILE__,
    '/', // path
];
$_SERVER['argc'] = 2;

ob_start();
$this->codeIgniter->run();
$actual = ob_get_clean();

expect($actual)->toContain('Welcome to CodeIgniter');

Here is the complete tests:

<?php

namespace AppSpec\Controllers;

describe('Home Dispatch', function () {

    describe('/', function () {

        it('contains "welcome" greeting', function () {

            $_SERVER['argv'] = [
                __FILE__,
                '/', // path
            ];
            $_SERVER['argc'] = 2;

            ob_start();
            $this->codeIgniter->run();
            $actual = ob_get_clean();

            expect($actual)->toContain('Welcome to CodeIgniter');

        });

    });

});

Time to run test:

$ vendor/bin/kahlan --coverage=4 --src=application/Controllers/Home.php
            _     _
  /\ /\__ _| |__ | | __ _ _ __
 / //_/ _` | '_ \| |/ _` | '_ \
/ __ \ (_| | | | | | (_| | | | |
\/  \/\__,_|_| |_|_|\__,_|_| | |

The PHP Test Framework for Freedom, Truth and Justice.

Working Directory: /Users/samsonasik/www/CodeIgniter4

.                                                                   1 / 1 (100%)



Expectations   : 1 Executed
Specifications : 0 Pending, 0 Excluded, 0 Skipped

Passed 1 of 1 PASS in 0.120 seconds (using 4Mo)

Coverage Summary
----------------
                               Lines           %

 \                             1 / 1     100.00%
└── App\                       1 / 1     100.00%
   └── Controllers\            1 / 1     100.00%
      └── Home                 1 / 1     100.00%
         └── Home::index()     1 / 1     100.00%

Total: 100.00% (1/1)

Coverage collected in 0.003 seconds (using an additionnal 16Ko)

Done 😉

Tagged with: ,

Functional Test for Zend\Expressive Routed Middleware with Kahlan ^3.0

Posted in testing, Tutorial PHP, Zend Framework by samsonasik on January 13, 2017

You may tried do functional test Zend\Expressive Routed Middleware and end up with “Unable to emit response; headers already sent” error.
This can happen because of during run test, the Test framework itself already run fwrite() or echo to build test report, and make the headers_sent() return true.

To handle that, we can use ob_start(), but since the header is sent in the background, we need to place in both places:

  • test bootstrap
  • before each test

Seriously? Yes! That’s make sure we only get Diactoros response that we use in the buffer to be tested.

Preparation

As usual, we need require kahlan/kahlan:^3.0 in require-dev:

$ composer require --dev kahlan/kahlan:^3.0 --sort-packages

Set Kahlan’s Bootstrap and before each globally

In Kahlan, we can set tests bootstrap and what in all before each test with Kahlan\Filter\Filter in kahlan-config.php, so we can write:

<?php
//kahlan-config.php
use Kahlan\Filter\Filter;

ob_start();
Filter::register('ob_start at each', function($chain) {
    $root = $this->suite();
    $root->beforeEach(function () {
        ob_start();
    });
    return $chain->next();
});
Filter::apply($this, 'run', 'ob_start at each');

Write Spec and Run In Action

Now, if we use Expressive skeleton application, and for example, we need to test App\Action\PingAction routed middleware, we can write spec in spec directory:

.
├── composer.json
├── config
├── data
├── kahlan-config.php
├── public
├── spec
│   └── App
│       └── Action
│           ├── PingActionDispatchSpec.php
├── src
│   └── App
│       └── Action
│           ├── PingAction.php

As the App\Ping\PingAction is return Zend\Diactoros\Response\JsonResponse which contains “ack” data with time() method call:

return new JsonResponse(['ack' => time()]);

The spec can be the following:

<?php
namespace AppSpec\Action;

use Zend\Diactoros\ServerRequest;
use Zend\Expressive\Application;

describe('PingAction Dispatch', function () {

    beforeAll(function() {
        $container = require 'config/container.php';
        $this->app = $container->get(Application::class);
    });

    describe('/api/ping', function () {

        it('contains json "ack" data', function () {

            allow('time')->toBeCalled()->andReturn('1484291901');

            $serverRequest = new ServerRequest([], [], '/api/ping', 'GET');
            $this->app->run($serverRequest);

            $actual = ob_get_clean();
            expect($actual)->toBe('{"ack":"1484291901"}');

        });

    });

});

The ob_start() will automatically called during test bootstrap and before each test.

Now, we can run the test:

$ vendor/bin/kahlan --coverage=4 --src=src/App/Action/PingAction.php 
            _     _
  /\ /\__ _| |__ | | __ _ _ __
 / //_/ _` | '_ \| |/ _` | '_ \
/ __ \ (_| | | | | | (_| | | | |
\/  \/\__,_|_| |_|_|\__,_|_| | |

The PHP Test Framework for Freedom, Truth and Justice.

Working Directory: /Users/samsonasik/www/expressive

.                                                                   1 / 1 (100%)



Expectations   : 1 Executed
Specifications : 0 Pending, 0 Excluded, 0 Skipped

Passed 1 of 1 PASS in 0.210 seconds (using 7Mo)

Coverage Summary
----------------
                                        Lines           %

 \                                      1 / 1     100.00%
└── App\                                1 / 1     100.00%
   └── Action\                          1 / 1     100.00%
      └── PingAction                    1 / 1     100.00%
         └── PingAction::__invoke()     1 / 1     100.00%

Total: 100.00% (1/1)

Coverage collected in 0.003 seconds (using an additionnal 0o)

Done 😉

Setup Java9 Early Access in Mac OS X

Posted in Tutorial Java by samsonasik on January 7, 2017

I have a chance to try latest Java9 development build 151, and I am very glad to have it successfully installed in my system. I am using OS X “El Capitan” (you may have latest: Mac OS X “Sierra” which I think will not be different for a way to install it). Here is the steps I did to get it works:

#JAVA
export JAVA_HOME=$(/usr/libexec/java_home)
export PATH=$JAVA_HOME/bin:$PATH
  • Apply ~/.bash_profile setting that has been modified by run command
$ source ~/.bash_profile

That’s it! Now, I can see it works:

java9-command-os-x

Merge multiple coverages for Kahlan with istanbul merge

Posted in testing, Tutorial PHP by samsonasik on December 24, 2016

As you may already knew, you can generate HTML coverage report with kahlan with the following command:

$ ./bin/kahlan --src=path/to/src --spec=path/to/spec --istanbul="coverage.json"
$ istanbul report

For multiple src path, with different specs location, as there are multiple coverages, we need to merge them. For example, we have the following application structure:

.
└── module
    ├── A
    │   ├── spec
    │   │   └── ASpec.php
    │   └── src
    │       └── A.php
    └── B
        ├── spec
        │   └── BSpec.php
        └── src
            └── B.php

Prepare dependencies

1. Install the following tools:

2. Install kahlan/kahlan:^3.0

$ composer require kahlan/kahlan:^3.0 --dev --sort-packages

Here is the sample of composer.json:

// composer.json
{
    "name": "samsonasik/kahlan-demo",
    "type": "project",
    "require-dev": {
        "kahlan/kahlan": "^3.0"
    },

    "autoload": {
        "psr-4": {
            "A\\": "module/A/src",
            "B\\": "module/B/src"
        }
    },

    "autoload-dev": {
        "psr-4": {
            "ASpec\\": "module/A/spec",
            "BSpec\\": "module/B/spec"
        }
    },

    "license": "MIT",
    "authors": [
        {
            "name": "Abdul Malik Ikhsan",
            "email": "samsonasik@gmail.com"
        }
    ],
    "config": {
        "bin-dir": "bin"
    },
    "minimum-stability": "dev",
    "prefer-stable": true
}

Write specs

We can write specs under module/{FOLDER}/spec.

Define Tasks on build.xml

We need to register multiple commands in build.xml

  • run bin/kahlan for module/A/src which set coverage target to coverage/coverge-A.json
  • run bin/kahlan for module/B/src which set coverage target to coverage/coverge-B.json
  • run instanbul-merge that merge coverage/coverage*.json to coverage.json
  • run instanbul report

The build.xml can be like the following:

<?xml version="1.0" encoding="UTF-8"?>
<project name="kahlan-demo app" default="build">

    <property name="toolsdir" value="${basedir}/bin/"/>
    <property name="moduledir" value="${basedir}/module/"/>

    <target name="build"
            depends="kahlan,coverage-report"
            description=""/>

    <target name="kahlan"
            description="Run kahlan">

            <!-- A -->
            <exec executable="${toolsdir}kahlan" failonerror="true" taskname="kahlan">
                <arg
                    line="--spec=${moduledir}A/spec/
                    --src=${moduledir}A/src
                    --istanbul=coverage/coverage-A.json
                    "/>
            </exec>
            <!-- A -->

            <!-- B -->
            <exec executable="${toolsdir}kahlan" failonerror="true" taskname="kahlan">
                <arg
                    line="--spec=${moduledir}B/spec/
                    --src=${moduledir}B/src
                    --istanbul=coverage/coverage-B.json
                    "/>
            </exec>
            <!-- B -->

    </target>

    <target name="coverage-report"
            description="Run coverage report generation">

            <!-- merging coverage under coverage/ to coverage.json -->
            <exec executable="istanbul-merge" failonerror="true" taskname="istanbul merge">
                <arg line="--out coverage.json coverage/*.json"/>
            </exec>

            <!-- generate report with use of merged coverages to coverage.json  -->
            <exec executable="istanbul" failonerror="true" taskname="istanbul report">
                <arg line="report"/>
            </exec>

    </target>

</project>

Run tasks

We can run ant command and we will get the following output:

$ ant
Buildfile: /Users/samsonasik/www/kahlan-demo/build.xml

kahlan:
   [kahlan]             _     _
   [kahlan]   /\ /\__ _| |__ | | __ _ _ __
   [kahlan]  / //_/ _` | '_ \| |/ _` | '_ \
   [kahlan] / __ \ (_| | | | | | (_| | | | |
   [kahlan] \/  \/\__,_|_| |_|_|\__,_|_| | |
   [kahlan]
   [kahlan] The PHP Test Framework for Freedom, Truth and Justice.
   [kahlan]
   [kahlan] Working Directory: /Users/samsonasik/www/kahlan-demo
   [kahlan]
   [kahlan] .                                                                   1 / 1 (100%)
   [kahlan]
   [kahlan]
   [kahlan]
   [kahlan] Expectations   : 1 Executed
   [kahlan] Specifications : 0 Pending, 0 Excluded, 0 Skipped
   [kahlan]
   [kahlan] Passed 1 of 1 PASS in 0.074 seconds (using 2Mo)
   [kahlan]
   [kahlan] Coverage Summary
   [kahlan] ----------------
   [kahlan]
   [kahlan] Total: 100.00% (1/1)
   [kahlan]
   [kahlan] Coverage collected in 0.002 seconds (using an additionnal 70Ko)
   [kahlan]
   [kahlan]
   [kahlan]             _     _
   [kahlan]   /\ /\__ _| |__ | | __ _ _ __
   [kahlan]  / //_/ _` | '_ \| |/ _` | '_ \
   [kahlan] / __ \ (_| | | | | | (_| | | | |
   [kahlan] \/  \/\__,_|_| |_|_|\__,_|_| | |
   [kahlan]
   [kahlan] The PHP Test Framework for Freedom, Truth and Justice.
   [kahlan]
   [kahlan] Working Directory: /Users/samsonasik/www/kahlan-demo
   [kahlan]
   [kahlan] .                                                                   1 / 1 (100%)
   [kahlan]
   [kahlan]
   [kahlan]
   [kahlan] Expectations   : 1 Executed
   [kahlan] Specifications : 0 Pending, 0 Excluded, 0 Skipped
   [kahlan]
   [kahlan] Passed 1 of 1 PASS in 0.045 seconds (using 2Mo)
   [kahlan]
   [kahlan] Coverage Summary
   [kahlan] ----------------
   [kahlan]
   [kahlan] Total: 100.00% (1/1)
   [kahlan]
   [kahlan] Coverage collected in 0.001 seconds (using an additionnal 70Ko)
   [kahlan]
   [kahlan]

coverage-report:
[istanbul report] Done

build:

BUILD SUCCESSFUL
Total time: 2 seconds

Now, we have successfully gotten merged coverage results with open coverage/lcov-report/index.html:

kahlan-multiple-cov-merge-result

Using Layout in CodeIgniter 4

Posted in CodeIgniter 4, Tutorial PHP by samsonasik on November 25, 2016

CodeIgniter 4 is not ready for production use, but we can already play with it. We can apply layout support to avoid repetitive header/footer/sidebar html code in our application’s views by provide helper and autoload it in the hook.

Ok, let’s start, first, we can clone a CI4 project by run command:

git clone https://github.com/bcit-ci/CodeIgniter4.git

We can use PHP-Development server launcher by go to CodeIgniter4 directory and run command:

php serve.php 

and we will get the page:
ci4
The view of “Home::index()” of controller is placed at application/Views/welcome_message.php:

application/
├── Config
├── Controllers
│   └── Home.php
├── Views
│   ├── errors
│   ├── form.php
│   └── welcome_message.php

with code called in the controller like the following:

<?php namespace App\Controllers;

use CodeIgniter\Controller;

class Home extends Controller
{
    public function index()
    {
        return view('welcome_message');  
    }
}

For example, we need to move the header and footer to the separate file, named application/Views/layout.php:

application/
├── Config
├── Controllers
│   └── Home.php
├── Views
│   ├── errors
│   ├── form.php
│   ├── layout.php
│   └── welcome_message.php

So, Let’s prepare the layout:

<html>
   <head></head> <!-- move code from welcome_message.php's html <head> to here -->
   <body>
        <!-- move code from welcome_message.php's style to here, 
             or use separate file for css and apply to <head>
        -->
	
        <div class="wrap">
            <?php echo $content; ?>
        </div>
   </body>
</html>

Now, we can write a helper to wrap it, for example, named render helper. We can create a file named application/Helpers/render_helper.php:

application/
├── Config
├── Controllers
├── Helpers
│   └── render_helper.php
├── Views

Our render helper can have function() for render view with layout functionality, which we get the content of view, and then apply to the layout:

<?php

if ( ! function_exists('render'))
{
    function render(string $name, array $data = [], array $options = [])
    {
        return view(
            'layout',
            [
                'content' => view($name, $data, $options),
            ],
            $options
        );
    }
}

If most of the controllers will use the render helper, we can then autoload it in the Events:

application/
├── Config
│   ├── Events.php
├── Controllers
├── Helpers
├── Views

with post_controller_constructor event point:

<?php namespace Config;

use CodeIgniter\Events\Events;

Events::on('post_controller_constructor', function() {
    helper('render');
});

And now, we are ready to use the render() function in the controller:

<?php namespace App\Controllers;

use CodeIgniter\Controller;

class Home extends Controller
{
    public function index()
    {
        return render('welcome_message');  
    }
}

Done 😉

Unit and Functional testing Zend Framework 3 Controller with Kahlan 3.0

Posted in testing, Tutorial PHP, Zend Framework 2 by samsonasik on October 24, 2016

This post will cover unit and functional testing ZF3 Controller with Kahlan 3.0. For example, you have a ZF3 Skeleton application with an IndexController like the following:

namespace Application\Controller;

use Zend\Mvc\Controller\AbstractActionController;
use Zend\View\Model\ViewModel;

class IndexController extends AbstractActionController
{
    public function indexAction()
    {
        return new ViewModel();
    }
}

As usual, we need to require kahlan/kahlan:^3.0 via composer command:

composer require --dev kahlan/kahlan:^3.0 --sort-packages

You can then write the spec. Let’s write our spec inside module/Application/spec like the following structure:

module/Application/
├── config
├── spec
│   ├── Controller
│   │   ├── IndexControllerDispatchSpec.php
│   │   └── IndexControllerSpec.php
├── src
│   ├── Controller
│   │   ├── IndexController.php

if we are only have the 1 module, named Application module, we can define the spec and src path via kahlan-config.php like the following:

// ./kahlan.config.php
$commandLine = $this->commandLine();
$commandLine->option('spec', 'default', 'module/Application/spec');
$commandLine->option('src', 'default', 'module/Application/src');

Or for multi-modules, we can run parallel command that specify --spec and --src in command like the following:

vendor/bin/kahlan --spec=module/Application/spec --src=module/Application/src

in each iteration. If you’re using ant, you can write a build.xml for tasks definition:

<?xml version="1.0" encoding="UTF-8"?>
<project name="My Website" default="build">
    
    <!-- executable files directory definition -->
    <property name="toolsdir" value="${basedir}/vendor/bin/"/>
    <!-- module directory definition --> 
    <property name="moduledir" value="${basedir}/module/"/>

    <target name="build"
            depends="kahlan"
            description=""/>

    <target name="kahlan"
            description="Run kahlan">
        
        <parallel>    
        
            <!-- Application -->    
            <exec executable="${toolsdir}kahlan" failonerror="true" taskname="kahlan">
                <arg 
                    line="-spec=${moduledir}Application/spec/ 
                    --src=${moduledir}Application/src"/>
            </exec>
            <!-- Application -->
            
            <!-- other modules run test definition go here --> 
        </parallel>
        
    </target>

</project>

Unit testing

Let’s write the unit testing inside spec/Controller/IndexControllerSpec.php:

namespace ApplicationSpec\Controller;

use Application\Controller\IndexController;
use Zend\View\Model\ViewModel;

describe('IndexController', function () {
    
    given('controller', function () {
        
        return new IndexController();
    
    });
    
    describe('->indexAction()', function() {
        
        it('instance of ViewModel', function() {
            
            $actual = $this->controller->indexAction();
            expect($actual)->toBeAnInstanceOf(ViewModel::class);
            
        });
        
    });
    
});

That’s enough for IndexController::indexAction() unit test, nothing complex logic we need to accomodate as it only return the ViewModel instance, so we just need to check if return values is instance of ViewModel.

Functional Testing

Now, we need to make sure if the dispatch response of IndexController::indexAction() by open ‘/’ url that shown by user is the expected result, that show a welcome page, let’s do with spec/Controller/IndexControllerDispatchSpec.php:

namespace ApplicationSpec\Controller;

use Zend\Console\Console;
use Zend\Mvc\Application;

describe('IndexController Dispatch', function () {
    
    // setup the Application
    beforeAll(function () {
        
        Console::overrideIsConsole(false);
        $appConfig = include __DIR__ . '/../../../../config/application.config.php';
        $this->application = Application::init($appConfig);

        $events = $this->application->getEventManager();
        $this->application->getServiceManager()
                          ->get('SendResponseListener')
                          ->detach($events);

    });
    
    // dispatch '/' page tests
    describe('/', function() {
        
        it('contains welcome page', function() {
            
            $request     = $this->application->getRequest();
            
            $request->setMethod('GET');
            $request->setUri('/'); 
            
            // run app with '/' url
            $app =  $this->application->run();
            
            // expect actual response is contain
            // a welcome page
            expect(
                $app->getResponse()->toString()
            )->toContain('<h1>Welcome to <span class="zf-green">Zend Framework</span></h1>');
            
        });
        
    });
    
});

That’s it 😉